How to set combination of Yale Cable TSA Lock

Model number: YTP 1/ 32 / 119 /1

This resettable combination padlock is set to open at 0-0-0   (Even though dials may be positioned on ther numbers.)

  • Step 1. Turn the dials and align the numbers 0-0-0 so they are clearly visible inside the “Windows”.
  • Step 2. Pull up the shackle and turn it 90 ocounterclockwise to align the projection on the shackle with the notch on the lock body.
  • Step 3. Press the shackle down firmly and turn the shackle further 90 o counterclockwise so it is fixed in this position.
  • Step 4. Turn the dials to set a new combination.
  • Step 5. Return the shackle back to the original position. Your new combination is now set.
  • Step 6. TEST THE LOCK BEFORE USE.

OVERRIDE INDICATOR

1. The red inspection status feature (red collar) will appear from the bottom of the shackle, if the TSA baggage screener has inspected your bag or if your lock has been tampered with.
2. To reset the red indicator, you must perform the following 3 steps to turn the indicator back to the original position.

  • Step 1. Turn the dials to the opening combination.
  • Step 2. Pull up the shackle.
  • Step 3. To reset the red indicator, you can either turn the shackle 360 counterclockwise until you hear a “Click” or simply insert a small pin-like device, into the small hole that is located on the side of the housing, on the opposite end of the dials.

Keep your combination in a safe and accessible place for future reference.

Published 1 Dec 2008

Print